RGB Music Controller, IR, 12V DC
This is an RGB Led strip light controller with remote.
-
- 20 key remote.
- DC 12 – 24v power connector with an IR sensor.
- 4 preset sound controlled modes.
- 7 static colors and Four preset lighting modes.
- Dimming functionality.
Application – used with 12 – 24v DC RGB Led strip-light to achieve ambience and color moods in homes e.g. near the Tv /Home Theatre system speakers, in clubs, community centres and hostels.
Related products
-
Uranus Emergency Power Backup Kit, 120min at 5W, 3-40W DC Output, Li-ion, 85-265V AC Input
0 out of 5(0)This is an led emergency power backup kit which automatically switches to emergency mode when the AC power goes off.
-
- The backup kit maintains illumination of an led fixture for up to 120 min at 5w on emergency.
- This product is compatible with led fixtures which have an external led driver ranging from output 3-40w.
- Easy connection and installation.
Application – This Emergency can be used in all led lights with external drivers to provide emergency lighting during black outs in commercial and residential Areas such as lobbies, corridors, staircase, parking lots and basements etc.
-
-
This product adopts a good sensitivity detector as it utilizes the infrared energy from humans as a control signal source to switch lights on and off. By the use of this PIR Sensor, considerable energy can be saved by switching off the lights when the space is not in use. Savings are huge in larger facilities.
- Detection range of 360 degrees.
- Has a timer for adjusting the lights on longevity.
- IP20 rating for indoor use only.
- Lux detection control
- Surface mounted.
Application – corridors, Lift Lobbies, washrooms, garage, basements and warehouses.
-
Micro limit Switch 3-Pin 15A 250VAC / 0.6A 12VDC
0 out of 5(0)These are small snap action switches, the trip mechanism is used to switch on off lights or devices where they are installed.
- Small size switch.
- Precise performance.
- Fast switching speeds.
Application- Ideal switches for cabinets,shelves and wardrobes.
-
Power Plug for 240V 2-Row Strip 15mm + Male Pin + End-cap
0 out of 5(0)These simple and easy to use power plugs are used to connect a 15mm single colour Led strip light which is 220/240v AC.
- Comes with a pin connector and end cap.
- Easy to use and install.
- Can connect upto a maximum of 40 meters length.
-
These are electronic switching devices used to switch on-off power for heavy loads using a secondary low current switch such as timers, motion sensors and photocells.
- It has no moving parts which wear out enabling it to last long.
- Protects appliance from transients because they have zero voltage turn on-offs.
- Instant switching with no delays.
Application – Room heaters, water heaters, lights and signage.
-
24 Key RGB Controller IR, 12V DC
0 out of 5(0)This IR (Infra-Red) controller and remote is designed for controlling Led flexible strip lights which are 12v DC and provides an easy to use solution for switching lights on or off and choosing lighting colours.
- 15 preset colours.
- Mode select i.e. – flash, strobe, fade and smooth.
- Speed function.
- Brightness control.
- 4 Patterns.
Application – used with 12V RGB Led strip-light to achieve ambience and color moods in homes, clubs, community centres, hostels and cabinet lighting.