Micro limit Switch 3-Pin 15A 250VAC / 0.6A 12VDC
These are small snap action switches, the trip mechanism is used to switch on off lights or devices where they are installed.
- Small size switch.
- Precise performance.
- Fast switching speeds.
Application- Ideal switches for cabinets,shelves and wardrobes.
Related products
-
This product adopts a good sensitivity detector as it utilizes the infrared energy from humans as a control signal source to switch lights on and off. By the use of this PIR Sensor, considerable energy can be saved by switching off the lights when the space is not in use. Savings are huge in larger facilities.
- Detection range of 360 degrees.
- Has a timer for adjusting the lights on longevity.
- IP20 rating for indoor use only.
- Lux detection control
- Surface mounted.
Application – corridors, Lift Lobbies, washrooms, garage, basements and warehouses.
-
Power Plug for 240V Sngl Strip 8/10mm + Male Pin + End-cap
0 out of 5(0)These simple and easy to use power plugs are used to connect an 8/10mm single colour Led strip light which is 220/240v AC.
- Comes with a pin connector and end cap.
- Easy to use and install.
- Can connect upto a maximum of 40 meters length.
-
Black Rocker Switch 3-Pin 15A 250VAC
0 out of 5(0)This is an on-off action switch, the light is activated only when the switch is on.
- Small size switch.
- Precise performance.
- Fast switching speeds.
Application – Switch for under cabinet lighting, shelves and wardrobe lighting.
-
These simple and easy to use power plugs with dimmer are used to connect an 8/10mm single colour Led strip light which is 220/240v AC.
- Comes with a pin connector and end cap.
- Dimmable.
- Easy to use and install.
- Can connect upto a maximum of 40 meters length.
-
DC Strip-Controller Connector + Wire RGB
0 out of 5(0)These connectors are used to connect a cut RGB Led strip light to a 24 key controller using the four pins connector.
-
These are electronic switching devices used to switch on-off power for heavy loads using a secondary low current switch such as timers, motion sensors and photocells.
- It has no moving parts which wear out enabling it to last long.
- Protects appliance from transients because they have zero voltage turn on-offs.
- Instant switching with no delays.
Application – Room heaters, water heaters, lights and signage.









